Ebay® Ultra-Strong Bending-Insensitive Single-Mode Fiber G.657.B3
- Classification:YOFC single-mode communication fiber
- Release time:2025-12-03
- Page views:0
Ebay® Ultra-Strong Bending-Insensitive Single-Mode Fiber G.657.B3
- Classification:YOFC single-mode communication fiber
- Release time:2025-12-03
- Page views:0
1. Product Application
• Fiber optic patch cords of various structures
• FTTX high-speed optical router
• Optical cables with small bending radius requirements
• Small-sized fiber optic devices and optical components
2. Product Standards
eBay®The ultra-bend-insensitive single-mode fiber is fully compatible with ITU-TG.652.D and IEC60793-2-50B.1.3 fiber standards, and its performance meets and exceeds the relevant provisions of ITU-TG.657.B3 and IEC 60793-2-50 B6.b3, thus achieving compatibility and matching with existing fiber optic networks and making it easier for customers to use and maintain.
3. Product Features
• Exceeds ITU-T G.657.B3 standard requirements, with a minimum bending radius of 5mm, and is fully compatible with G.652.D optical fiber.
• Low attenuation, meeting OESCL band communication requirements
• Can be used in various optical cables, including ribbon cables, with extremely low bending-induced loss.
Precise geometric parameters and a large mold diameter ensure low weld loss and high weld efficiency.
• High dynamic fatigue parameters ensure service life under ultra-small bending radii.
4. Specifications
characteristic | condition | data | unit | |
|---|---|---|---|---|
Optical properties | ||||
attenuation | 1310nm | ≤0.35 | [dB/km] | |
1383nm (after hydrogen aging) | ≤0.35 | [dB/km] | ||
1550nm | ≤0.21 | [dB/km] | ||
1625nm | ≤0.23 | [dB/km] | ||
attenuation change relative to wavelength | 1285~1330nm, compared to 1310nm | ≤0.03 | [dB/km] | |
1525~1575nm, relative to 1550nm | ≤0.02 | [dB/km] | ||
Zero-dispersion wavelength (λ)0) | -- | 1300~1324 | [nm] | |
Zero dispersion slope (S0) | -- | ≤0.092 | [ps/(nm2·km）] | |
Polarization mode dispersion coefficient (PMD) | Maximum value of a single optical fiber | -- | ≤0.1 | [ps/√km] |
| Fiber optic link values (M=20, Q=0.01%) | -- | ≤0.06 | [ps/√km] | |
| Typical value | -- | 0.04 | [ps/√km] | |
Optical cable cutoff wavelength (λ)cc) | -- | ≤1260 | [nm] | |
Mold field diameter (MFD) | 1310nm | 8.2~9.0 | [μm] | |
1550nm | 9.1~10.1 | [μm] | ||
Effective group refractive index (N)eff) | 1310nm | 1.468 | -- | |
1550nm | 1.469 | -- | ||
Point discontinuity | 1310nm | ≤0.05 | [dB] | |
1550nm | ≤0.05 | [dB] | ||
Geometric properties | ||||
Cladding diameter | -- | 125.0±0.7 | [μm] | |
Cladding non-circularity | -- | ≤0.7 | [%] | |
Coating diameter | -- | 235~245 | [μm] | |
Coating/cladding concentricity error | -- | ≤12.0 | [μm] | |
Coating non-roundness | -- | ≤6.0 | [%] | |
Core/cladding concentricity error | -- | ≤0.5 | [μm] | |
Warpage (radius) | -- | ≥4 | [m] | |
Delivery length | -- | The longest is 25.2 | [km/pan] | |
Environmental characteristics at 1310nm, 1550nm and 1625nm | ||||
Temperature-induced attenuation | -60℃ to 85℃ | ≤0.05 | [dB/km] | |
Temperature-humidity cycle additional attenuation | -10℃ to 85℃, 98% relative humidity | ≤0.05 | [dB/km] | |
Additional attenuation due to water immersion | 23℃, 30 days | ≤0.05 | [dB/km] | |
Humid heat-induced attenuation | 85℃, 85% relative humidity, 30 days | ≤0.05 | [dB/km] | |
Dry heat aging | 85℃, 30 days | ≤0.05 | [dB/km] | |
Mechanical properties | ||||
Screening tension | -- | ≥9.0 | [N] | |
-- | ≥1.0 | [%] | ||
-- | ≥100 | [kpsi] | ||
| Macro bending additional loss | 1 circle, radius 10mm | 1550nm | ≤0.03 | [dB] |
| 1 circle, radius 10mm | 1625nm | ≤0.1 | [dB] | |
| One circle, radius 7.5mm | 1550nm | ≤0.08 | [dB] | |
| One circle, radius 7.5mm | 1625nm | ≤0.25 | [dB] | |
| 1 circle, radius 5mm | 1550nm | ≤0.15 | [dB] | |
| 1 circle, radius 5mm | 1625nm | ≤0.45 | [dB] | |
Coating peel strength | Typical average | 1.5 | [N] | |
peak | 1.3~8.9 | [N] | ||
Dynamic fatigue parameters (n)d） | -- | ≥20 | -- | |
